4.4
Protective conductor connection and shield support
The following diagram shows a typical Weidmüller shield connection clamp for the shield
supports.
①
②
Figure 4-4
If the shielding procedures described and the specified cable lengths are not observed,
malfunctions may occur.
NOTICE
It is only permissible to use screws with a permissible insertion depth of 4 - 6 mm.
Terminal Module 150 (TM150)
Operating Instructions, 03/2012, A5E03758735A
Protective conductor connection M4/1.8 Nm
Shield connection terminal, Weidmüller company, type: KLBÜ CO1, order number:
1753311001
Shield support and protective conductor connection of the TM150
DANGER
4.4 Protective conductor connection and shield support
1
2
Electrical installation
19