Pick Mode - Datalogic QuickScan Lite QW2400 Quick Reference Manual

Pick Mode

Specifies the ability of the reader to decode labels only
when they are close to the center of the aiming pattern,
which is the area indicated by the two blue arrows. Pick
Mode is a Decoding and Transmission process where bar
codes that are not within the configurable distance from
the center of the aiming pattern are not acknowledged or
transmitted to the host. It is active only while the scanner
is in Trigger Single mode. If the scanner switches to a dif-
ferent Read Mode, Pick Mode is automatically disabled.
NOTE
PICK MODE
26
This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for
more information.
ENTER/EXIT PROGRAMMING MODE
Pick Mode = Disable
QuickScan™ Lite QW2400