2-22 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
Oil Service Indicator Light Reset
The yellow oil service indicator light (LED) [A] goes on
for changing the engine oil when the distance of the
service mode [B] reaches 5 000 km (3 107 mile). The
yellow oil service indicator light (LED) goes off when the
oil service mode is reset. Reset the oil service mode
after changing the engine oil.
It is not necessary to reset the oil service mode at the
1000 km initial maintenance of the oil change.
Push the ADJ button [C] for 2 seconds to display the ser-
Push the Reset button [D] and hold it in. After 2 seconds,
the yellow oil service indicator light (LED) goes off and the
service mode display turns to 0.0.
Oil Filter Replacement
Drain the engine oil (see Engine Oil Change).
Oil Filter Cap [A]
Replace the oil filter with a new one.
Apply engine oil to the grommet [A].
Install the oil filter so that the grommet faces to the engine
Replace the oil filter cap O-ring [A] with a new one.
Apply grease to the O-ring and install it.
Install the spring [B].
Install the oil filler cap and tighten it securely.
Torque - Oil Filter Cap: 9.3 N·m (0.95 kgf·m, 82 in·lb)
Pour in the specified type and amount of oil (see Engine