Periodic Maintenance Procedures
•
Remove the engine oil drain bolt [A] from the bottom of
the engine, and let the oil drain completely.
•
Replace the drain bolt assy with a new one.
•
Install the new drain bolt.
•
Tighten:
Torque - Engine Oil Drain Bolt: 25 N·m (2.5 kgf·m, 18 ft·lb)
•
Pour in the specified type and amount of oil.
Recommended Engine Oil
Type:
API SJ, SL or SM with JASO MA, MA1 or
MA2
Viscosity: SAE 5W-50
Capacity:
1.3 L (1.4 US qt)
1.5 L (1.6 US qt) (when engine is completely
dry)
○
Do not add any chemical additive to the oil. Oils fulfilling
the above requirements are fully formulated and provide
adequate lubrication for both the engine and the clutch.
○
Although 5W-50 engine oil is the recommended oil
for most conditions, the oil viscosity may need to be
changed to accommodate atmospheric conditions in
your riding area.
•
Check the oil level (see Oil Level Inspection in the Engine
Lubrication System chapter).
•
Replace the oil filler cap/dipstick O-ring with a new one.
•
Apply grease to the O-ring.
•
Tighten the oil filler cap/dipstick securely.
NOTE
PERIODIC MAINTENANCE 2-21
Comments to this Manuals
Latest comments: