Periodic Maintenance Procedures
Clean the fuel pipe [A].
If the new hose is not installed soon, cover the fuel pipe
with the vinyl bag [B] to keep it clean.
Remove the vinyl bag on the pipe.
Check that there are no flaws, burrs, and adhesion of
foreign materials on the fuel pipe [A].
Replace the fuel hose and hose clamps with new ones,
and install them.
Run the fuel outlet hose correctly (see Cable, Wire, and
Hose Routing section in the Appendix chapter).
Pinch the new hose clamp [A] with a suitable tool [B] to
Recommend Tool: OETIKER 1098
Push and pull [A] the fuel hose [B] back and forth, and
make sure it is locked and does not come off.
Leaking fuel can cause a fire or explosion resulting
in severe burns. Make sure the fuel hose joint is
installed correctly on the delivery pipe and that it
If it comes off, reinstall the hose together with the new
Start the engine and check the fuel hose for leaks.
PERIODIC MAINTENANCE 2-15