Front Brake Pad Removal
Pad Pin [A]
Brake Pads [B]
Front Brake Pad Installation
Push the caliper pistons in by hand as far as they will go.
Check that the pad spring [A] is in place on the caliper.
Install the brake pads [B] and insert the pad pin.
Apply a non-permanent locking agent to the threads of
the brake pad pin [C].
Torque - Brake Pad Pin: 18 N·m (1.8 kgf·m, 13 ft·lb)
After servicing, it takes several applications of the
brake lever before the brake pads contact the disc,
which could result in increased stopping distance
and cause an accident resulting in injury or death.
Do not attempt to ride the motorcycle until a firm
brake lever is obtained by pumping the lever until
the pads are against the disc.
Rear Brake Pad Removal
Mud Guard (see Mud Guard Removal in the Frame
Rear Caliper Holder Pins [A]
Rear Caliper [B]
Remove the brake pads [A].