11-8 FINAL DRIVE
Final Gear Case
Inspect the drive shaft [A] and gear [B] for wear or dam-
If there is any damage, replace it.
When replacing the drive shaft, also replace the bearing
and oil seal.
Inspect the bearings [C] for excessive play or noise.
If there is any damage, replace it (see Final Gear Bearing
Final Gear Bearing Replacement
Disassembly the final gear case (see Final Gear Case
Remove the bearings.
Special Tool - Oil Seal & Bearing Remover [A]: 57001-Y024
For removing the final shaft bearing and the drive shaft
bearing, use the bearing driver set.
Special Tool - Bearing Driver Set: 57001-1129
Replace the bearings with new ones.
Press the bearings until they are bottomed.
Special Tool - Bearing Driver Set [A]: 57001-1129