8-4 ENGINE REMOVAL/INSTALLATION
Use the center stand to support the motorcycle upright.
Squeeze the front brake lever slowly and hold it with a
Motorcycle may fall over unexpectedly resulting in
an accident or injury. Be sure to hold the front brake
when removing the engine.
Be sure to hold the front brake when removing the
engine, or the motorcycle may fall over. The engine
or the motorcycle could be damaged.
Engine Oil (see Engine Oil Change in the Periodic Main-
Coolant (see Coolant Change in the Periodic Mainte-
Side Fairings (see Side Fairing Removal in the Frame
Rear Wheel (see Rear Wheel Removal in the
Exhaust Pipe (see Exhaust Pipe Removal in the Engine
Top End chapter)
Air Cleaner Box (see Air Cleaner Box Removal in the
Fuel System (DFI) chapter)
Throttle Body Assy (see Throttle Body Assy Removal in
the Fuel System (DFI) chapter)
Intake Manifold (see Intake Manifold Removal in the En-
gine Top End chapter)
Starter Motor (see Starter Motor Removal in the Electri-
cal System chapter)
Loosen the bolt [A], and remove the fuel hose bracket [B].