6-6 CONVERTER SYSTEM
Left Crankcase Cover
Left Crankcase Cover Removal
Left Lower Fairing (see Lower Fairing Removal in the
Left Crankcase Outer Cover Bolts [A]
Left Crankcase Outer Cover [B]
Left Crankcase Cover Bolts [A]
Left Crankcase Cover [B] and Gasket
Left Crankcase Cover Installation
Check the left crankcase cover bearing [A] for wear or
If the bearing is noisy or have excessive play, replace it
with a new one (see Crankcase Cover Bearing Replace-
Replace the left crankcase cover gasket with a new one.
Install the dowel pins [A] and new gasket are in place on
the left crankcase.
Install the left crankcase cover and tighten them bolts.
Torque - Left Crankcase Cover Bolts: 9.8 N·m (1.0 kgf·m,
Install the left crankcase outer cover and tighten them
Install the left lower fairing (see Lower Faring Installation
in the Frame chapter).
Left Crankcase Cover Bearing Replacement
Left Crankcase Cover (see Left Crankcase Cover Re-
Special Tool - Inside Circlip Pliers: 57001-143
Remove the left crankcase cover bearing.
Special Tool - Oil Seal & Bearing Remover [A]: 57001-1058