5-10 ENGINE TOP END
Cylinder Head Cover
Cylinder Head Cover Removal
Remove the storage box (see Storage Box Removal in
the Frame chapter).
Open the clamp and disconnect the breather hose [A].
Loosen the bolt and remove the fuel hose bracket [B].
Cylinder Head Cover Bolts [C]
Cylinder Head Cover [D]
Cylinder Head Cover Gasket
Cylinder Head Cover Installation
Replace the cylinder head cover gasket with a new one.
Install the new cylinder head cover gasket [A] on the cylin-
der head cover.
Using a high flash-point solvent, clean off any oil or dirt
that may be on the liquid gasket coating area. Dry them
with a clean cloth.
Apply liquid gasket [B] to the cylinder head cover as
Sealant - Liquid Gasket, TB1216: 92104-1063
Install the dowel pin [C].
Install the cylinder head cover to the cylinder head.
Install the cylinder head cover bolts.
Torque - Cylinder Head Cover Bolts: 9.8 N·m (1.0 kgf·m, 87
Install the removed parts (see appropriate chapters).