Nuts [A] (Both Sides)
Bracket [B] (Both Sides)
Fuel Tank [B]
Fuel Tank Installation
Installation is the reverse of removal.
Be sure that the pad [A] is in position.
Fuel Tank Cleaning
Gasoline and low flash-point solvents can be
flammable and/or explosive and cause severe
burns. Clean the tank in a well-ventilated area, and
take care that there are no sparks or flame any-
where near the working area. Do not use gasoline
or low flash-point solvents to clean the tank.
Fuel Tank (see Fuel Tank Removal)
Fuel Pump (see Fuel Pump Removal)
Pour some high flash-point solvent into the fuel tank and
shake the tank to remove dirt and fuel deposits.
Draw the solvent out of the fuel tank.
Dry the tank with compressed air.
Fuel Pump (see Fuel Pump Installation)
Fuel Tank (see Fuel Tank Installation)
FUEL SYSTEM (DFI) 3-87