Advertisement
Quick Links
PLANET ENW-9503/9504 PCI Fast Ethernet Adapter
User's Manual
Thank you for purchasing our product!
This guide contains information to install and configure the 10/100 Fast Ethernet PCI
Adapter for proper operation. The 10/100 Fast Ethernet PCI Adapter is a 32-bit
10/100 Mbps Ethernet network interface card for PCI local bus-compliant PCs. It
supports bus mastering architecture and auto-negotiation which make it possible to
use one common RJ-45 port and standard twisted-pair cabling for both 10 Mbps and
100 Mbps connection. Extensive driver support for commonly used network operating
systems is also provided.
Package Contents
Carefully unpack the contents of the package and verify them against the checklist
below.
PLANET ENW-9503/9504 10/100 Fast Ethernet PCI Adapter
10/100 Fast Ethernet PCI Adapter
CD Disk (included User's Manual)
Please inform your dealer immediately should there be any incorrect, missing or
damaged parts.
If possible, retain the carton, including the original packing materials.
Use them again to repack the product in case there is a need to return it for repair.
Back up your Driver Diskette and use the copy as the working diskette. Do this to
protect the original from accidental damage.
Advertisement
Related Manuals for Planet PCI Fast Ethernet Adapter ENW-9503
Summary of Contents for Planet PCI Fast Ethernet Adapter ENW-9503
-
Page 1: Package Contents
PLANET ENW-9503/9504 PCI Fast Ethernet Adapter User's Manual Thank you for purchasing our product! This guide contains information to install and configure the 10/100 Fast Ethernet PCI Adapter for proper operation. The 10/100 Fast Ethernet PCI Adapter is a 32-bit 10/100 Mbps Ethernet network interface card for PCI local bus-compliant PCs. -
Page 2: Hardware Description
Hardware Description The ENW-9504 10/100 Fast Ethernet PCI Adapter has a RJ-45 connector and one LED indicator. LED Indicator The adapter provides LED indicator for monitoring network conditions. This section describes the function of LED. Color LNK/ACT Green Duplex Green This LED lights up to indicate the presence of network connection Hardware Installation 1. -
Page 3: Specifications
3. Connect your adapter to the network. Connect the adapter to the network using twisted-pair cabling with an RJ-45 connector. 4. Power on the PC. After hardware installation has been completed, power on the computer. 5. Change your computer's BIOS setup to enable Bus Master mode and select an IRQ setting. -
Page 4: Software Driver Support
Operating Environment Power Consumption Temperature Humidity Size Hardware Certification Certification Emissions Class B Immunity Software Driver Support NetWare ODI Drivers Novell NetWare 3.12, 4.1, 4.11, 5.0, NetWare LAN WorkPlace TCP/IP, Novell LAN Analyzer for NetWare, IBM OS/2 Warp Connect Packet Drivers FTP PC/TCP, NCSA TCP/IP NDIS 2.0 Drivers Microsoft LAN Manager V2.x, IBM LAN Server 4.0, IBM LAN Support,... - Page 5 Windows NT 4.0 NDIS 5.0 Drivers Windows 98, 98SE Windows 2000 Windows XP The publisher assumes no responsibility for errors that may appear in this document. Nor does it make any commitment to update the information it contains. All brand and product names mentioned are trademarks or registered trademarks of their respective companies.
-
Page 6: Safety Instructions
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. SAFETY INSTRUCTIONS 1. Please read these safety instructions carefully. 2. Please keep this User's Manual for later reference. 3. - Page 7 e. The equipment has dropped and damaged. f. If the equipment has obvious sign of breakage. 15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED: STORAGE TEMPERATURE ABOVE60(140),IT MAY DAMAGE THE EQUIPMENT. 16. The sound pressure level at the operators position according to IEC 704-1: 1982 is equal or less then 70dB(A).