Page 1
4KEX100-DP-KVM DP KVM Extender Over HDBase-T User Manual...
Page 3
AV Access Technology Limited assumes no responsibility for any inaccuracies that may be contained in this document. AV Access Technology Limited also makes no commitment to update or to keep current the information contained in this document.
Important Safety Instructions Do not expose this device to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the device. Do not install or place this unit in a bookcase, built-in cabinet, or in another ...
Overview Overview The 4KEX100-DP-KVM extender is a 100m 4K DisplayPort over HDBT extender with USB 2.0 and audio pass-through. It offers the distribution of uncompressed 4K@30Hz UHD video, audio, power, RS232 and USB 2.0 together up to 100m/328ft over a single CatX cable.
Overview Package Contents Before you start the installation of the product, please check the package contents: Transmitter 4KEX100-DP-KVM x 1 Receiver 4KEX100-DP-KVM x 1 Power Adapter (DC 12V 2A) x 1 Phoenix Male Connector (3.5mm 3 Pin) x 2 ...
Overview Panel Front Panel Transmitter/Receiver Name Description On: The device is powered on. Power LED (Red) Off: The device is powered off. Blinking: The device is working properly. Status LED (Green) Off: The device is not working properly. On: Audio and video signal is HDCP protected. HDCP LED Blinking: Audio and video signal is not HDCP protected.
Page 9
Overview Rear Panel Transmitter Name Description Connects to a DC 12V power adapter. Note: Only one power adapter is needed at transmitter DC 12V side. HDBT Out Connects to the receiver via a CatX cable. RS232 RS232 pass-through DP In Connects to a DisplayPort source.
Page 10
Overview Receiver Name Description Connects to a DC 12V power adapter. DC 12V Note: Only one power adapter is needed at transmitter side. HDBT In Connects to the transmitter via a CatX cable. RS232 RS232 pass-through DP Out Connects to a DisplayPort display. Audio In Connects to an audio source such as PC.
Please test the source and display devices to determine whether there are compatibility issues. 4KEX100-DP-KVM supports up to 4K@30Hz 4:4:4 8bit. When both DP source and display devices support 4K@60Hz 4:4:4 8bit, display device will not output signal (Even though all the LEDs of extender are normal).
Page 13
Trouble Shooting Typical questions How to deal with video flash or cut off during installation? Power indicator should be solid on and status indicator should be blinking. If not, please check if the power adapter is well connected. Link indicator should be solid on. If it is blinking or off, it is likely a ...
Specification Specification Technical Video Signal Type DP1.2 with HDCP1.4 Audio Format L/R channel PCM 2.0 640x480 , 800x600 , 1024x768 1280x720 , 1280x768 , 1280x800 1280x960 , 1280x1024 , 1360x768 1366x768 , 1440x900 , 1600x900 Input/Output Resolution Support 1600x1200 , 1680x1050 , 1920x1200 1920x1200 , 2560x1440...
Page 16
200 mm × 25 mm ×100 mm (W x H x D) 7.91'' x 0.99'' x 3.95'' Transmitter: 0.5kg Product Weight Receiver: 0.5kg Cable Specifications: Note: AV Access recommends the use of T568B straight-through Category cables. Cable Type Range Supported Video 100m/328ft 1080p@60Hz 36bit 1080p@60Hz 48bit...
The warranty has expired. The defects are caused by the fact that the product is repaired, dismantled or altered by anyone that is not from an AV Access Technology Limited authorized service partner. The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User Guide.
Need help?
Do you have a question about the 4KEX100-DP-KVM and is the answer not in the manual?
Questions and answers