Technical Specifications - Siemens ET 200SP HA Manual

Technical specifications

Article number
General information
Product type designation
HW functional status
Firmware version
Vendor identification (VendorID)
Device identifier (DeviceID)
Product function
● I&M data
Engineering with
● PCS 7 configurable/integrated as of version
Configuration control
via dataset
Supply voltage
Type of supply voltage
Rated value (DC)
permissible range, lower limit (DC)
permissible range, upper limit (DC)
Reverse polarity protection
Short-circuit protection
Mains buffering
● Mains/voltage failure stored energy time
Input current
Current consumption, max.
Inrush current, max.
I²t
Power
Infeed power to the backplane bus
Power loss
Power loss, typ.
Address area
Address space per module
● Address space per module, max.
Address space per station
● Address space per station, max.
Hardware configuration
Integrated power supply
Interface Module IM 155-6 PN HA (6DL1155-6AU00-0PM0)
Manual, 05/2017, A5E39262148-AA
6DL1155-6AU00-0PM0
IM 155-6 PN
FS01
V1.0
02AH
030FH
Yes; I&M0 to I&M3
V9.0
No
DC
24 V
19.2 V
28.8 V
Yes
Yes
10 ms
700 mA; +19.2 V to +28.8 V DC
5 A
0.36 A²·s; Due to increased mains buffering of 10
ms
7.5 W; No doubling in redundant mode as the in‐
feed power is also designed as redundant.
2.4 W
256 byte
1 440 byte; 1 440 bytes R1 and S1 without CiR,
otherwise 1 000 bytes
Yes; 24 V DC
7
25