Nokia G-240WZ-A User Manual page 20

CRC16 En-cap command class (0x56, V1)
This command class will report the information CRC16 encapsulation supported by Nokia Smart
Home ONT
Association Group Info command class (0x56, V1)
This command class will report the information about life line association group supported by Nokia
Smart Home ONT
Device reset locally command class (0x5A, V1)
This command class will report the group member of life line association that, device is reset to
factory default.
Application status command class (0x22, V1)
This command class will report the information CRC16 encapsulation supported by Nokia ONT
Manufacturer specific command class (0x72, V2)
Manufacturer specific command class is used to identify the manufacturer and device type of a
device.
Power Level command class (0x73, V1)
Power level command class is used to check the connection quality between two Z-Wave devices
Association command class (0x85, V2)
Association command class is used to configure end smart device to send notification/alarm/event
to gateway (ONT)
Version command class (0x86, V2)
Version command class will be used to obtain the Z-Wave and firmware version of a device
Security command class (0x98, V1)
This command class will report the security command class supported by Nokia Smart Home ONT.
This will inform the pairing device to understand that ONT is a security enabled device or not?
Nokia Smart Home 7368 GPON ONT - G-240WZ-A User Manual
20