Sequence; Set Seq; How To Select A Sequence; Seq - HP 8642A Operation And Calibration Manual

Synthesized signal generator
Hide thumbs Also See for 8642A:
Table of Contents

Advertisement

Model 8642A/B
Description
Procedure
SET SEQ
Operation
SEQUENCE
You can use the Sequence function to select a particular sequence of instrument states
sa ved
in
recall registers and then step through the sequence. You can also view the
next register to be displayed.
The Signal Generator has 51 registers (00 through 50) that can be recalled in
sequential order. The selected sequence is kept through Instrument Preset and through
Power STBY to ON and unplugging of the ac power cord. However, if RAM memory
is ever lost (for example, if the battery loses its charge), the sequence will be lost and
the default turn-on sequence setting will be set as start
=
00, stop
=
50.
Note: Put the instrument in its initialized state by selecting (
INSTR PRESET I.
How to Select a Sequence
SEQ
Select the sequence range by first selecting the Set Sequence function and then by
entering 2, two-digit register numbers from 00 to 50:
SET SEQ ( [
SHIFT) C9EQJ}
and the values for the desired range of recall registers.
When the Set Sequence function is selected, the number of the next register is
displayed as " NEXT
=
NN
II
where NN is the two-digit number of the next register to
be recalled in the current sequence.
Only a sequence of increasing register numbers (for example, 10 through 20) can be
selected.
How to Step Through the Sequence
Just select
c::§.gQJ
to step through the selected sequence.
Example
Select a sequence from register 05 through register 15.
First, select SET SEQ:
LOCAL
(keys)
...
(program
codes)
Display
rlEli.T
, I _
11
j
I
SHIFT )
ss
START
ENTRY
SET SEQ
~
~EQ
5£1
STOP
3 -161

Advertisement

Table of Contents
loading

This manual is also suitable for:

8642b

Table of Contents