NEC V850ES/KE1+ User Manual page 259

Figure 7-21. Example of Register Settings in Clear & Start Mode Entered by TI010 Pin Valid Edge Input (1/2)
(a) 16-bit timer mode control register 01 (TMC01)
0 0 0
(b) Capture/compare control register 01 (CRC01)
0 0 0
(c) 16-bit timer output control register 01 (TOC01)
OSPT01 OSPE01
0 0 0
CHAPTER 7 16-BIT TIMER/EVENT COUNTER 0
TMC013 TMC012 TMC011
0 1 0
CRC012 CRC011 CRC010
0 0 0/1
TOC014 LVS01 LVR01
0/1 0/1 0/1
User's Manual U16896EJ2V0UD
OVF01
0/1 0
0: Inverts TO01 output on match
between CR010 and CR011.
1: Inverts TO01 output on match
between CR010 and CR011
and valid edge of TI010 pin.
Clears and starts at valid
edge input of TI010 pin.
0/1 0/1
0: CR010 used as compare register
1: CR010 used as capture register
0: TI011 pin is used as capture
trigger of CR010.
1: Reverse phase of TI010 pin is
used as capture trigger of CR010.
0: CR011 used as compare register
1: CR011 used as capture register
TOC011 TOE01
0/1 0/1
0: Disables TO01 output
1: Enables TO01 output
Specifies initial value of
TO01 output F/F
00: Does not invert TO01 output on match
between TM01 and CR010/CR011.
01: Inverts TO01 output on match between
TM01 and CR010.
10: Inverts TO01 output on match between
TM01 and CR011.
11: Inverts TO01 output on match between
TM01 and CR010/CR011.
259