Troubleshooting - Lenovo ThinkPad Bluetooth Laser Mouse User Manual

7. Troubleshooting

If you have any problems with your Bluetooth mouse, please check the following:
• Check the system requirements to make sure that your system is compatible.
• Check to see if the batteries in the mouse are installed correctly. Make sure the polarity of the
batteries corresponds with the polarity signs inside the mouse battery compartments.
• When the mouse LED is lit red, it indicates battery power low. Replace them with new batteries
immediately.
• Once the Bluetooth stack (see "Installing the WIDCOMM Bluetooth Stack" on page 4) has
been installed in your computer, you can check the battery status of mouse from Control Panel
>Mouse > Bluetooth.
• If the mouse fail to work, check the USB mouse function in your system's BIOS. The function
should be enabled for
the normal use of mouse.
• If your PC system's BIOS setup has options for the mouse, make sure they are set to default
settings. If you are not familiar with the BIOS, refer to your PC's manual for more information.
• Only use the mouse on a clean, flat, non-slippery surface in order to ensure smooth and accurate
cursor action. If you use a mouse-pad, choose a light-colored one, not a dark one, to use less
battery power.
For further assistance with any other questions you may have, please contact your dealer for
technical support.