Loading Paper Into The Paper Deck - Canon imagePRESS C8000VP Quick Manual

▀

Loading Paper into the Paper Deck

2
1
2
28
1
Register the paper size for the paper deck at [Paper
Settings] in [Preferences] (Settings/Registration).
"Settings/Registration" > "Preferences" > "Paper Settings" >
"Registering the Paper Size and Type for a Paper Source" in
the User's Guide
2
Open the paper deck.
1
Press the button on the paper deck.
2
Pull out the paper deck until it stops.
• Check that the inside lifter descends to the paper loading
position.
IMPORTANT
If the machine is in the Sleep mode (the touch panel is not
displayed, and only
to open the paper deck. In this case, press
reactivate the machine, and then press the open button on the
paper deck.
3
Squeeze the lever on the paper holder plate as shown
below. Without releasing the lever, slide the paper holder
plate until it does not catch on the paper to set.
4
Move the size change plates to a position where it does
not catch on the paper.
1
Remove the size change plates lock.
2
Slide the size change plates to a position where it does not catch
1
on the set paper.
(Energy Saver) is lit), you may be unable
(Energy Saver) to