Configuring Local Area Network - D-Link DIR-879 Quick Installation Manual

DIR-879

Configuring Local Area Network

1. Go to the Connections Setup / LAN page.
2. If needed, change the IPv4 address of the router's LAN interface and the
mask of the local subnet. To do this, click the IPv4 tab and specify
needed values in the IP Address and Subnet mask fields in the IP
section.
3. If needed, specify your own IPv6 address of the router's LAN interface.
To do this, click the IPv6 tab and select the Static value from the
Addressing Mode drop-down list in the IP section. Then specify the
needed value in the IP address field.
Quick Installation Guide
30