Charging The Battery; Fitting The Attachment Clip - Siemens gigaset 3000 micro Operating Instructions Manual

Giga 3000 Micro, IM1-engl, A31008-G3000-B022-1-6Z19

Charging the battery

The battery is supplied uncharged.
To charge the battery, insert the handset either into the base
station or the Gigaset 3000L Micro charging unit – you will
hear the confirmation beep. The charging operation is indi-
F
cated by a flashing LED on the handset:
Battery empty
1
Battery / charged
3
• Initially charge the batteries thoroughly; we recom-
mend charging the batteries for at least 16 hours with-
out interruption – irrespective of the charging status
icon.
• Once the first charging operation is complete, you can
replace the handset in the base station after any call.
Charging is controlled electronically. This ensures opti-
mum charging and prolongs battery life.
• The battery warms up during charging. This is normal
and not dangerous.
• The battery charging status is only correctly displayed af-
ter uninterrupted charging/discharging.
Approved battery:
Toshiba Power Pack (NiMH), order no. V30145-K1310-X143.
Battery operating times/charging times:
Capacity Standby time
(mAh) (hours)
600 up to 200

Fitting the attachment clip

Push the clip onto the back of the handset until the protru-
sions slot into place.
8
31.03.00
3000co.fm
8
7
2
Battery / charged
3
Battery full
Charging
Talktime
time
(hours)
(hours)
approx. 15 approx. 5