Installing The Hyper-V Server 2012 Operating System - Lenovo ThinkServer TS150 Operating System Installation Manual

Hide thumbs Also See for ThinkServer TS150:
Table of Contents

Advertisement

1. Insert the operating system installation disc into the optical drive that you have set as the first startup
device. Then, start the server from the optical drive.
2. If the message Press any key to boot from cd or dvd is displayed, press any key. If the message Windows
Setup [EMS Enabled] is displayed, press Enter. Wait several minutes for the system to load the files.
3. In the Windows Server 2016 window, select the language and other options. Then, click Next.
4. Click Install now.
5. Type your product key and then click Next.
6. Read the license terms and select I accept the license terms. Then, click Next.
7. Select the type of installation you need. The following steps are based on the scenario that Custom:
Install Windows only (Advanced) is selected in this step.
8. In the "Where do you want to install Windows?" window, choose the storage device to install the
operating system, and then click New.
9. Type the amount of space, and then click Apply.
10. In the Windows Setup window, click OK.
11. Ensure that the drive partition is correct, and then click Next. The installation begins.
12. In Settings window, type your password and click Finish.
13. Follow the instructions on the screen to log in to the operating system when prompted.

Installing the Hyper-V Server 2012 operating system

This topic provides instructions on how to install the Hyper-V Server 2012 operating system.
To install the Hyper-V Server 2012 operating system, do the following:
1. Insert the operating system installation disc into the optical drive that you have set as the first startup
device, and start the server from the optical drive.
2. When the message Press any key to boot from CD or DVD... is displayed, press any key. If the message
Windows Setup [EMS Enabled] is displayed, press Enter. The message Loading files... will be displayed.
Wait several minutes for the system to load the files.
3. When the "Microsoft Hyper-V Server 2012" window is displayed, configure the language and other
options you need and then click Next.
4. Click Install now.
5. Read the license terms and select I accept the license terms. Then click Next.
6. Select the type of installation you need. The following steps are based on the scenario that Custom:
Install the newer version of Hyper-V Server only (advanced) is selected in this step.
7. In the "Where do you want to install Windows?" window, depending on the SATA configuration on
your server, do one of the following:
• If your SATA configuration is set as RAID (both OB RAID and ADD on RAID): do the following:
a. Connect the USB storage device that contains the driver to your server and click Load Driver.
b. Click Browse to locate the required driver and then click OK.
c. In the "Select the driver to be installed" window, select Hide drivers that are not compatible
with hardware on this computer. Select the driver that you want to install, and then click Next
to install the driver.
• If your SATA configuration is set as AHCI: go to step 8.
8. In the "Where do you want to install Hyper-V Server?" window, click Drive options (advanced).
9. Select the hard disk drive on which you want to install the operating system, and then click New.
10
ThinkServer TS150 Operating System Installation Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents