Installing The Receiver; Opening The Front Panel - Pioneer VSX-D909S Operating Instructions Manual

Operating range of remote control unit
The area in which you can use the remote control to
operate the VSX-D909S is fairly large. To use, point the
remote control toward the remote sensor on the front
panel of this unit while within the range shown right.
Remote control may not function properly if:
• There are obstacles between the remote control and
the remote sensor.
• Direct sunlight or fluorescent light is shining onto the
remote sensor.
• The receiver located near a device emitting infrared
rays.
• Operated simultaneously with another remote control
which uses infrared rays.

Installing the Receiver

Please note:
• Do not place objects directly on top of this unit. This would
prevent proper heat dispersal.
• When installing in a rack, shelf, etc., be sure to leave more
than 8 inches of space above the receiver.

Opening the Front Panel

To open the front panel push gently on the lower third of the panel
with your finger.
Before You Start
30
30
23 feet (7m)
8 inches (20 cm)
Receiver
11