Operating Instructions - Kärcher HDS 3.9/30 Operator's Manual

STEP 7: (Electric Start Models) Turn the engine
switch to "Start" po si tion.
Burner
Switch
Thermostat
STEP 9: Turn the burner switch
"ON". Turn thermostat dial to the
210° mark.

OPERATING INSTRUCTIONS

On-Off
Switch
98000800-14
98000800-16
STEP 10: (Pump Steam Option)
A. Operate machine as instructed.
B. Open steam valve coun ter-
c l o ck w i s e , w h i c h w i l l l o w e r
pres sure.
C. Turn thermostat knob to 250°F.
D. When steam is no longer desired,
Turn steam valve clockwise and
thermostat knob to 200°F.
HDS 600-606
OFF
STEP 8: (Electric Start Models) Turn the key to the
START position, and hold it there until the engine starts.
If the engine fails to start within 5 seconds, release the
key, and wait at least 10 seconds before op er at ing the
starter again.
Using the electric starter for more than 5 seconds
at a time will over heat the starter motor and can
dam age it.
When the engine starts, release the key, allowing it to
return to the ON position. If the choke knob has been
pulled to the CLOSED position to start the engine,
grad u al ly push it to the OPEN position as the engine
warms up.
Steam
Valve
98000800-17
zle without engaging the safe ty
latch on the spray gun trig ger.
• 9.800-080.0-AB
ON
START
Engine
Switch
98000800-15
Safety
Latch
98000800-18
WARNING! Never replace noz -
9