Ipod Messages; Xm Radio Messages - Pioneer VSX-818V Operating Instructions Manual

Audio/video multi-channel receiver
Hide thumbs Also See for VSX-818V:
Table of Contents

Advertisement

12
Additional information

iPod messages

Symptom
Cause
Error I1
There is a problem with the signal path from the
iPod to the amplifier.
Error I2
The software version being used with the iPod
needs to be updated.
Error I3
The iPod that is not supported is connected.
When the iPod software version is too old.
Error I4
When there is no response from the iPod.
No Music Track There are no playable songs currently stored in
the iPod.
No Track
When there are no tracks in the category
selected on the iPod.

XM radio messages

Symptom
Cause
Check XM Tuner The XM Mini-Tuner is not installed in the XM
Mini-Tuner Dock or the XM Mini-Tuner dock is
not connected to this receiver.
Check Antenna The XM antenna is not connected to the XM Mini-
Tuner Dock or the XM antenna cable has
become damaged.
Loading
The XM Mini-Tuner is acquiring audio or
program information from the XM satellite
signal. This message can also occur in weak XM
signal conditions.
No Signal
The XM Mini-Tuner is not receiving the XM
satellite signal. Something may be blocking the
XM antenna's view of the satellites or the
antenna is not properly aimed.
Off Air
The XM channel you selected is not currently
broadcasting.
CH Unauthorized You may be attempting to tune to an XM channel
that is blocked or that you cannot receive with
your XM subscription package.
CH Unavailable The selected channel is not available. The
channel may have been reassigned to a different
channel number. This message may occur
initially with a new radio or a radio that has not
received XM's signal for an extended period.
70
En
Action
Switch off the amplifier and reconnect the iPod
to the amplifier. If this doesn't seem to work, try
resetting your iPod.
Update the software being used with the iPod
(please use the latest iPod software versions
later than the iPod updater 2004-10-20).
Check whether the iPod was supported by this
receiver (page 55).
Update the iPod software to the latest version.
Update the iPod software to the latest version.
Input some music files compatible with iPod
playback.
Select a different category.
Action
Confirm the XM Mini-Tuner is fully seated in the
dock and check the XM Mini-Tuner dock cable is
connected to this receiver.
Check that the XM antenna is securely
connected to the XM Mini-Tuner Dock and check
the antenna cable for damage. Replace the XM
antenna if the cable is damaged.
This message should disappear in a few seconds
in good signal conditions. If you see this
message often, reposition the XM antenna to get
better signal reception.
Check for antenna obstructions and reposition
the XM antenna to get better signal reception.
See instructions supplied with the XM Mini-Tuner
and Dock for antenna installation information.
Check back at a later time; in the mean time,
select another channel.
Consult the latest channel guide at
www.xmradio.com for the current list of
channels. For information on receiving this
channel, visit www.xmradio.com or contact XM
Satellite Radio at 1-800-967-2346.
Consult the latest channel guide at
www.xmradio.com for the current list of
channels. For cases of a new radio or a radio that
has not received XM's signal for an extended
period, allow the radio to receive the XM satellite
signal for at least 5 minutes and then try to select
the channel again.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents