Table of Contents
Advertisement
11
Other Settings
The Other Setup menu
(VSX-918V model only)
SR+ Setup for Pioneer flat panel TVs
Make the following settings if you have
connected a Pioneer flat panel TV to this
receiver using an SR+ cable. Note that the
number of settings available will depend on the
flat panel TV you've connected.
See also Using this receiver with a Pioneer flat
panel TV on page 62.
1
Press RECEIVER on the remote control,
then press the SETUP button.
An on-screen display (OSD) appears on your
TV. Use
control to navigate through the screens and
select menu items. Press RETURN to confirm
and exit the current menu.
2
Select 'Other Setup' then press ENTER .
System Setup
3
Make sure 'SR+ Setup' is selected from the
Other Setup menu and then press ENTER .
5.Other Setup
a.SR+ Setup
4
Select the 'PDP Volume Control' setting
you want.
• OFF – The receiver does not control the
volume of the flat panel TV.
• ON – When the receiver is switched to one
of the inputs that use the flat panel TV
(DVD/BD, or another function below), the
volume on the flat panel TV is muted so
only sound from the receiver is heard.
66
En
and ENTER on the remote
1.Auto MCACC
2.Manual MCACC
3.Manual SP Setup
4.Input Assign
5.Other Setup
: Exit
5a.SR + Setup
PDP Volume Control
OFF
PDP Input Select
DVD/BD
[ input–1 ]
TV/SAT
[ input–2 ]
DVR
[ input–3 ]
VIDEO
[
TV
Monitor Out Connect
[
OFF
:Finish
:Return
5
Assign any input source connected to the
flat panel TV to the corresponding input
number.
This matches the receiver's input source with a
numbered video input on the flat panel TV. For
example, assign DVD/BD to input-2 if you
have connected your DVD video output to video
input 2 on the flat panel TV.
• The Monitor Out Connect should be set
to the input that you've used to connect
this receiver to your flat panel TV.
5a.SR + Setup
PDP Volume Control
PDP Input Select
DVD/BD
TV/SAT
DVR
VIDEO
Monitor Out Connect
6
When you're finished, press RETURN .
You return to the Other Setup menu.
]
]
5a.SR + Setup
PDP Volume Control
[ ON ]
[ ON ]
PDP Input Select
input–1
DVD/BD
[ input–2 ]
TV/SAT
[
DVR
[ input–3 ]
[ input–3 ]
[
TV
]
VIDEO
[
Monitor Out Connect
[
OFF
]
[
:Finish
input–2
OFF
]
TV
]
OFF
]
:Finish
Hide quick links:
Advertisement
Table of Contents
