Remote Control (Vsx-517) - Pioneer VSX-517-S/-K Operating Instructions Manual

04 Controls and displays
SIGNAL
Selects an input signal (page 34).
SB ch
Selects the surround back channel mode
(page 35) or virtual surround back mode
(page 35).
9 INFO
Use to bring up information screens on a
digital TV.
10 SHIFT
Press to access the 'boxed' commands (above
the buttons) on the remote. These buttons are
marked with an asterisk (* ) in this section.
11 Remote control LED
Lights when a command is sent from the
remote control.
12 SOURCE
Press to turn on/off other components
connected to the receiver (see page 50 for
more on this).
13 RECEIVER
Switches the remote to control the receiver
(used to select the green commands above the
number buttons (SETUP, etc). Also use this
button to set up surround sound (page 9,
page 39).
14 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the TV CTRL button. Thus if you
only have one TV to hook up to this system
assign it to the TV CTRL MULTI CONTROL
button. If you have two TVs, assign the main TV
to the TV CTRL button (see page 50 for more
on this).
Use to turn on/off the power of the TV.
INPUT SELECT
Use to select the TV input signal.
TV CH +/–
Use to select channels.
28
En
TV VOL +/–
Use to adjust the volume on your TV.

Remote control (VSX-517)

RECEIVER
SLEEP
1
INPUT SELECTOR
DVD 5.1
DVD TV
CD CD-R
STEREO/
AUTO SURR
F.S.SURR
2
TOP MENU
S.RETRIEVER
3
MIDNIGHT
ENTER
TUNER
EDIT
4
SETUP
VOLUME
EFFECT/CH SEL LEVEL
5
HDD
DVD/DVR
CH
GUIDE REC
TIMER REC INFO
DISPLAY CLASS
MPX
SHIFT
6
RECEIVER
1 RECEIVER
Switches the receiver between standby and on.
2 Listening mode buttons
AUTO SURR
Switches between Auto surround mode
(Auto playback on page 31) and Stream
Direct playback. Stream Direct playback
bypasses the tone controls for the most
accurate reproduction of a source
(page 34).
DIMMER PHASE
7
DVR
RECEIVER
8
FM AM
STANDARD ADV.SURR
MENU
9
DIALOG
10
ONE
TOUCH
COPY
11
RETURN
ANALOG ATT
MUTE
DVD
SUBTITLE
CH
AUDIO
12
REC STOP JUKEBOX
DVD/DVR
13
TUNING STATION
TUNER