Pioneer VSX-517-S/-K Operating Instructions Manual page 23

Controls and displays
STANDARD
Press for Standard decoding and to switch
between the various 2 Pro Logic II options
/VSX-817 model only – 2 Pro Logic IIx and
Neo:6 options (page 31).
ADVANCED SURROUND
Switches between the various surround
modes (page 32).
AUTO SURR/DIRECT
Switches between Auto surround mode
(Auto playback on page 31) and Stream
Direct playback. Stream Direct playback
bypasses the tone controls for the most
accurate reproduction of a source
(page 34).
8 PHASE CONTROL
Press to switch on/off Phase Control (page 36).
9 ACOUSTIC EQ
Press to select an Acoustic Calibration EQ
setting (page 34).
10 PHONES jack
Use to connect headphones (when connected,
there is no sound output from the speakers).
11 DIALOGUE ENHANCEMENT
Use to make dialog stand out when watching
TV or a movie (page 37).
12 SOUND RETRIEVER
Press to restore CD quality sound to
compressed audio sources (page 37).
13 MIDNIGHT/LOUDNESS
Switches to Midnight or Loudness listening
(page 37).
14 SB ch PROCESSING
Selects the surround back channel mode
(page 35) or virtual surround back mode
(page 35).
15 TONE
Press this button to access the bass and treble
controls, which you can then adjust with the
MULTI JOG dial (page 37).
16 SPEAKERS
Use to change the speaker system (page 56)
and the impedance setting (page 60).
17 SIGNAL SELECT
Selects an input signal (page 34).
18 TUNING / STATION
Selects the frequency (page 47) and station
presets (page 47) when using the tuner.
19 TUNER EDIT
Memorizes/names stations for recall
(page 47).
20 System Setup menu controls
SETUP
Use with the MULTI JOG dial to access
the System Setup menu (page 39).
RETURN
Confirms and exits the current menu.
21 VSB MODE
Press to switch on/off Virtual Surround Back
(VSB) mode (page 35).
22 DIMMER
Dims or brightens the display.
23 QUICK SETUP
See Using the Quick Setup on page 9.
24 VIDEO INPUT (VSX-817 model only)
See Connecting to the front panel video
terminal on page 17.
25 MCACC/ AUDIO IN jack (VSX-817 model only)
Use to connect a microphone when
performing Auto MCACC setup, or connect an
auxiliary component using a stereo mini-jack
cable (page 17).
26 MASTER VOLUME
04
23
En