About The Wma9 Pro Decoder; Connecting Analog Audio Sources; Connecting A Component To The Front Panel Inputs - Pioneer VSX-1018AH-K 7 Operating Instructions Manual

Audio/video multi-channel receiver
Table of Contents

Advertisement

03
Connecting your equipment
1
Connect a coaxial-type
your digital component to the COAXIAL IN 2 (CD)
input.
Use a coaxial cable for the connection.
2
For recording equipment, connect the optical-type
DIGITAL output to a digital input on the recorder.
Use an optical cable to connect to the OPTICAL OUT.

About the WMA9 Pro decoder

This receiver has an on-board Windows Media™ Audio 9
3
Professional
(WMA9 Pro) decoder, so it is possible to
playback WMA9 Pro-encoded audio using a coaxial or
optical digital connection when connected to a WMA9
Pro-compatible player. However, the connected PC, DVD
player, set-top box, etc. must be able to output WMA9 Pro
format audio signals through a coaxial or optical digital
output.

Connecting analog audio sources

This receiver features two stereo audio-only inputs. One
of these inputs (CD-R) has corresponding outputs for use
with audio recorders.
OUT
IN
OUT
DVR1
DVR2
OUT
IN
OUT
SPEAKERS
R
A
I CH IN
SURROUND SURROUND BACK
Tape deck, etc.
Note
1 • If your digital component only has an optical digital output, you can connect it to one of the optical inputs on this receiver using an optical cable. When
you set up the receiver you'll need to tell the receiver which input you connected the component to (see also The Input Setup menu on page 67).
• The digital outputs from other components can be connected to any spare digital audio inputs on this receiver. You can assign them when setting up
the receiver (see also The Input Setup menu on page 67).
2 In order to record some digital sources, you must make analog connections as explained in Connecting analog audio sources below.
3 • Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
• With WMA9 Pro, sound problems may occur depending on your computer system. Note that WMA9 Pro 96 kHz sources will be downsampled to 48 kHz.
20
En
1
digital audio output on
COMPONENT VIDEO
MONITOR
ANTENNA
OUT
OUT
IN
1
IN
2
IN
3
Y
MONITOR
IN
OUT
P
B
FM UNBAL 75
ASSIGNABLE
P
R
SIRIUS
ZONE 2
1
-
3
IN
IN
OUT
IN
OUT
OUT
IN
IN
FRONT
CENTER
(Single)
CD
CD-R
CD-R
SUBWOOFER
SURROUND SURROUND BACK
FRONT
CENTER
SURROUND
SURROUND BACK /
L
R
L
R
SELECTABLE
SEE INSTRUCTION MANUAL
SELECTABLE
VOIR LE MODE D'EMPLOI
VSX-1018AH
OUT
PLAY
IN
REC
R
L
AUDIO IN/OUT
Connect the analog audio outputs of the source
component to one of the AUDIO inputs.
Connect using a stereo RCA/phono jack audio cable.
• If you're connecting a tape deck, MD recorder, etc.,
connect the analog audio outputs (OUT) to the
analog audio inputs on the recorder.
2
Connecting a component to the front
panel inputs
The front panel inputs comprise a composite video jack
(VIDEO), stereo analog audio inputs (AUDIO L/R) and an
optical digital audio input (DIGITAL IN). You can use
these connections for any kind of audio/video
component, but they are especially convenient for
portable equipment such as camcorders, video games
and portable audio/video equipment.
AUTO SURR/
SOUND
STREAM DIRECT
RETRIEVER
PHONES
MULTI-ZONE
CONTROL
ON/OFF
AM LOOP
PRE OUT
TV game, video camera, etc.
• Select these inputs by pressing VIDEO or using
INPUT SELECT (remote) to select VIDEO.
B
L
(Single)
STANDARD
ADVANCED
STEREO/
SURROUND
SURROUND
A.L.C.
VIDEO INPUT
VIDEO INPUT
VIDEO
VIDEO
L
L
AUDIO
AUDIO
R
R
+
SPEAKERS
ST
ST
VIDEO OUTPUT
iPod DIRECT
iPod DIRECT
MCACC
DIGITAL IN
DIGITAL IN
USB
USB
SETUP MIC
DIGITAL OUT

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1018ah-k - vsx av receiverVsx-1018ah-k

Table of Contents