Pioneer S-RS3TB Operating Instructions Manual

Pioneer S-RS3TB Operating Instructions Manual

Pioneer speaker system user manual
Hide thumbs Also See for S-RS3TB:
Table of Contents

Advertisement

Available languages

Available languages

S-RS3TB
S-RS7TB
WHAT'S IN THE BOX
S-RS3TB
Front speakers x 2
BEFORE USE
Thank you for buying this Pioneer product.
Please read through these operating instructions before
using your speaker system to optimize performance.
• The nominal impedance of this speaker system is
8 Ω. Connect the speaker system to an amplifier with
a load impedance ranging from 4 Ω to 16 Ω (a model
with "4 Ω to 16 Ω" displayed on the speaker output
terminals).
In order to prevent damage to the speaker system
resulting from input overload, please observe the
following precautions:
• When connecting or disconnecting cables, be sure
amplifier power is OFF.
• Do not use excessive amplifier volume if using a tone
control to emphasize high or low frequencies.

INSTALLATION PRECAUTIONS

• Do not install these units near a stove or other
heating appliance, or put them in a place exposed to
the sun. Such locations may cause the cabinet to
change color and the speaker system to break down.
• Do not use the speaker to output distorted sound for
long periods of time. This can result in a fire hazard.
• Do not connect this speaker to any amplifier other
than the one supplied with this system. Connection
to any other amplifier may result in a malfunction or
a fire.
Surround speakers x 2
Center speaker x 1
Non-skid pads x 20 (1 set)
S-RS7TB

Operating Instructions

Metal catches x 4
Screws x 8
Operating instructions
FRONT / CENTER SPEAKERS
• Do not attach the front and center speakers to the
wall or ceiling. It may fall off and cause injury.
• This speaker system is magnetically shielded.
However, depending on the installation location,
color distortion may occur if the speaker system is
installed extremely close to the screen of a television
set.
If this happens, turn off the television, then turn it on
again after 15 min to 30 min. If the problem persists,
place the speaker system away from the television
set.
SURROUND SPEAKERS
• The surround speakers are not magnetically shielded
and so should not be placed near a TV or monitor, as
the interaction of magnetic materials can cause
distortion of the colors on your TV screen. Magnetic
storage media (such as floppy discs and tape or video
cassettes) should also not be kept close to these
speakers.
Speaker System
Center (2 m)
Front right/left (3 m)
Surround right/left (6 m)
Speaker cords x 5
1
En

Advertisement

Table of Contents
loading

Summary of Contents for Pioneer S-RS3TB

  • Page 1: Operating Instructions

    WHAT’S IN THE BOX S-RS3TB Front speakers x 2 BEFORE USE Thank you for buying this Pioneer product. Please read through these operating instructions before using your speaker system to optimize performance. • The nominal impedance of this speaker system is 8 Ω.
  • Page 2: Placement And Fine Tuning

    PLACEMENT AND FINE TUNING FRONT SPEAKERS For best results the loudspeakers should be separated a distance approximately equal to the listening distance. Angling the loudspeakers inward towards the listener will improve the image stability for non-central listeners. Close proximity to a side or rear wall will enhance the midbass performance, although too close (particularly a corner location) and the bass may be unnaturally high and image performance may be degraded.
  • Page 3: Securing The Front Speakers

    5 mm to 7 mm • If you are unsure of the quality and strength of the walls, consult a professional for advice. • Pioneer is not responsible for any accidents or damage that result from improper installation. SECURING THE FRONT SPEAKERS •...
  • Page 4: Cabinet Maintenance

    • If you are unsure of the quality and strength of the walls, consult a professional for advice. • Pioneer is not responsible for any accidents or damage that result from improper installation. CABINET MAINTENANCE Use a polishing cloth or dry cloth to wipe off dust and dirt.
  • Page 5: Contenido De La Caja

    S-RS3TB S-RS7TB CONTENIDO DE LA CAJA S-RS3TB Altavoces delanteros x 2 ANTES DE USAR Muchas gracias por la adquisición de este producto Pioneer. Lea todo este manual de instrucciones para aprender a operar correctamente su modelo. • La impedancia nominal de este sistema de altavoces es de 8 Ω.
  • Page 6: Ubicación Y Ajustes Finos

    UBICACIÓN Y AJUSTES FINOS ALTAVOCES DELANTEROS Para obtener mejores resultados, los altavoces se deben separar una distancia aproximadamente equivalente a la distancia de escucha. Gire los altavoces hacia adentro, en la dirección del oyente, para mejorar la estabilidad de imagen de los oyentes que no están situados en el centro.
  • Page 7: Conéctelos A Los Terminales De Altavoz De La Parte Trasera De Los Altavoces

    5 mm a 7 mm • Si tiene dudas acerca de las características de la pared, consulte a un profesional. • Pioneer no se hace responsable de accidentes, daños o lesiones como resultado de una instalación inadecuada. FIJACIÓN SEGURA DE LOS ALTAVOCES DELANTEROS •...
  • Page 8: Mantenimiento De Las Cajas

    • Si tiene dudas acerca de las características de la pared, consulte a un profesional. • Pioneer no se hace responsable de accidentes, daños o lesiones como resultado de una instalación inadecuada. MANTENIMIENTO DE LAS CAJAS Use una gamuza o un paño secos para limpiar el polvo y la suciedad.
  • Page 9 S-RS3TB S-RS7TB 包裝箱中的內容 S-RS3TB 使用前 Pioneer 感謝您購買本份 產品。 為了能使夠發揮揚聲器系統發揮的最佳效能,請詳細閱 讀本操作手冊。 Ω。請將揚聲器系統連接到 • 本揚聲器系統標稱阻抗 Ω 到 Ω (揚聲器輸出端子標有 負載阻抗為 Ω 到 Ω "的型號)範圍內的擴大機。 “ 為了避免因輸入過載而損壞揚聲器系統,請遵循下 列安全注意事項: • 在連接或脫離連接線時,請確定擴大機電源已關閉。 • 使用音調控制強調高、低頻率時,擴大機音量切勿 調得太大。 安裝注意事項 • 切勿將本機安裝在烤箱或其他加熱設備附近,或置 於陽光直射之處,以免造成外箱變色及使揚聲器系 統損壞。 • 使用本揚聲器請勿長時間輸出失真的音響。這樣可 能造成揚聲器損壞,並有導致起火的危險。 • 切勿將此揚聲器連接至本系統所附以外的擴大機上。...
  • Page 10 中置揚聲器 此揚聲器應置於電視機下方。為了產生最佳效果,請將 揚聲器正面對準電視機的正面。若將揚聲器擺在電視機 下方並太過接近地板,則稍微上傾可能會比較有所幫 助。 將中置揚聲器安裝在電視機頂部時,請確定使用膠帶或 其他適當方法將揚聲器固定,否則揚聲器可能因地震等 外部震動而導致掉落,進而危及附近人員的安全或損壞 揚聲器。 環繞揚聲器 為了產生最佳效果,揚聲器應置於耳朵高度以上的位 置。視您房間的設計及個人喜好而定,左、右後揚聲器 應靠聆聽位置正後方的邊牆或牆壁擺放。 防滑墊 若要將前置、中置及環繞揚聲器擺在硬質地面上,如木 板地或磚地等,請在揚聲器底部表面上貼上四塊防滑 墊。 前置揚聲器 標準環繞音效設定 此種標準多聲道環繞音效揚聲器設定方式,可產生最佳 的 聲道家庭劇院音效。 連接您的系統 接線前確定已將所有設備關閉。 • 正確的揚聲器導線對於產生最佳聲音品質相當重要。 請確實連接正確的極性。 連接至擴大機背面上的揚聲器端子。 若要連接,請如下所示將條紋的揚聲器接線插入紅色 (+) 正極端子,將其他接線插入黑色 (–) 負極端子。 連接至揚聲器背面的揚聲器端子。 • 使用 中置揚聲器 鬆開揚聲器的端子,然後如下所示將條紋的揚聲器 接線插入紅色 (+) 正極端子,將其他接線插入黑色 (–) 負極端子。...
  • Page 11 在牆上安裝環繞揚聲器 固定前 • 請記住揚聲器系統很重且其重量有可能導致木質螺 絲鬆動或木質材料難以支撐,而使揚聲器摔落。因 此請確定使用以支撐揚聲器的牆壁有足夠支撐的強 度。切勿固定在膠合板或軟質的牆面上。 • 固定螺絲未隨產品附贈。請使用適用於牆壁材質及 可支撐揚聲器重量的螺絲。 5 mm 7 mm 備註 • 若不確定牆壁材質及強度,請向專業人士洽詢相關 資訊。 Pioneer 對於因安裝不當而導致之意外或損壞,概不 • 負責。 固定前置揚聲器 • 使用附贈的螺絲,將金屬掛鉤緊固於前置揚聲器後 面。 • 將市售的增強繩穿過金屬掛鉤使牆壁緊緊支撐住揚 聲器。請務必確認支撐揚聲器的牆壁有足夠的強度 承受揚聲器的重量。揚聲器緊固後,請確認它不會 掉落。 • 掉落時,揚聲器會導致損壞。 • 請勿將金屬掛鉤直接掛於牆壁上。它只能用於連接 增強繩以防止揚聲器落下。 將兩根增強繩穿過金屬掛鉤,並如上圖將揚聲器固定於 5 mm 牆壁上。...
  • Page 12 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270 環繞揚聲器 (S-RS3TB, S-RS7TB) .

This manual is also suitable for:

S-rs7tb

Table of Contents