Playing Back Tapes With Digital Effect - Sony DCRTRV950 Manual

Playing back tapes with digital effect

During playback, you can process a scene using the following digital effect:
STILL, FLASH, LUMI. and TRAIL.
(1) In the playback or playback pause, press FN and select PAGE2.
(2) Press DIG EFFT. The screen to select a desired digital effect appears.
(3) Press a desired mode. In the STILL or LUMI., the picture where you select the
mode is stored in memory as a still image.
(4) Press –/+ to adjust the effect. Refer to page 60 for details.
(5) Press
To return to FN
Press EXIT.
To cancel the digital effect
Press OFF to return to PAGE2.
Notes
•You cannot process externally input scenes using digital effect.
•You cannot record images on a tape on your camcorder when you have processed the
image using digital effect. However, you can record images on a "Memory Stick"
(p. 144, 156), or on a VCR using your camcorder as a player.
Pictures processed by digital effect
Pictures processed by digital effect are not output through the DV Interface.
When you set the POWER switch to OFF (CHG) or stop playing back
Digital effect is automatically canceled.
OK to return to PAGE2.
1
FN
2,3
DIG
DIG EFFT
OFF
EFFT
STILL
OK
LUMI. TRAIL
FLASH
85