Abtus AVS-1200C/V2 Owner's Manual

Multimedia controller

Advertisement

SPECIFICATIONS
PROGRAMMABLE
2 x configurable com ports provide control of Projector/Plasma/
MULTI MEDIA CONTROLLER
AV Switcher via RS-232 commands
CONFIGURING COM PORT
1 x configuring com port provides programming of controller
and acts as a slave when configured with another Master
controller or PC AP control
IR LEARNING
1 x programmable IR control (IRMCs) enables customized IR
control of projector when RS-232 control is not available
PROGRAMMABLE BUTTONS A total of 11 programmable buttons that can be configured with
RS-232 and/or IR control plus digital Volume control for Volume
Up, Down and Mute control
CUSTOMIZED BUTTON
Input selection/control buttons can be customized with clearly
LABEL / TEXT
labeled text/icon with cool backlit for visibility control even in
total darkness
LCD DISPLAY
Clear indication of status and function of the controller through
a small LCD panel
CLOCK
Built-in Clock function
AUTO SHUT-DOWN TIMER
A programmable timer that allows automatic shut down of the
system i.e. projector to preserve energy and prolong the
projector lamp life
MACRO CONTROL
Allows customized macro control, which makes control easier
for end users with just one touch of a button
VOLUME CONTROL
Allows control of volume of media switcher and/or projector
PANEL LOCK
Programmable “panel lock” functions that tie in with “Auto
Shut down timer” that prevent any mis-use of the panel after
normal class timing and “reset” based on pre-programmed time
* Specifications are subject to changes without notice.
Multi Media
Controller
Model: AVS-1200C/V2
ABtUS SINGAPORE PTE LTD
www.abtussingapore.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVS-1200C/V2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Abtus AVS-1200C/V2

  • Page 1 Programmable “panel lock” functions that tie in with “Auto Shut down timer” that prevent any mis-use of the panel after normal class timing and “reset” based on pre-programmed time * Specifications are subject to changes without notice. Model: AVS-1200C/V2 ABtUS SINGAPORE PTE LTD www.abtussingapore.com...
  • Page 2: Product Description

    ABtUS offers a universal projector controller that controls a projector's power on/off, input switching, and volume control via RS-232 and/or IR. The ABtUS AVS-1200C/V2 can also be configured as a motorized screen or room lightings control. It can also be easily mounted no matter where it is: In a lectern, desktop, wall, or even a rack.
  • Page 3: Remote Control Mode

    Buttons “Function Name” can be assign from its individual standard drop list. Once done the rest of the “Tab” will follows this configuration accordingly REMOTE CONTROL MODE Allows ABtUS Media Controller AVS-1200CV2 to be control through this software PHYSICAL CONTROLLER BUTTONS LAYOUT...
  • Page 4 Com 2 allows IR or Serial to be transmitted in the case if either one of the two is not available at the Projector controlled. “Check” on the respective box accordingly 1.2 “Com3 Tab” (Control of ABtUS AV Switcher AVS-1200SV2 or any RS-232 controlled AV switcher) This allows user to configure the communication port 2 accordingly with respect to their buttons communication protocol (command code of the projector) as well as the it’s parameter setting.
  • Page 5 User Operation Guide PROGRAMMING MODE PROGRAMMING MODE “Serial” 1.3 “Infrared Tab” This allows user to configure/Learn the IR command code of the Controlled projector in the case where This allow configuration of Com3 communication parameter i.e. Baud rate, Data Bit, RS-232 is not available.
  • Page 6 This allows configuration of “Relays” digital I/O for controlling of [projection screen in Check on “Use PC Time” to set time in 12 or 24 hour format with reference to PC time or conjunction with ABtUS screen controller AVS-SSR8V2. manually.
  • Page 7 User Operation Guide PROGRAMMING MODE PROGRAMMING MODE “Delay Time” 2.1 Opening a program file “Delay Time” setup allows setting of delay time between switching function of projector. Example: Projector ON “Warm up time”, Projector Off “Cool down time” and “Projector Input Switching interval time”...
  • Page 8 User Operation Guide PROGRAMMING MODE PROGRAMMING MODE Uploading of program file The following windows will shows once the function is successful Once programming is done, uploading can be done as followed: Connect up the PC serial to the configuration com port of the AVS-1200CV2 with the communication parameter set as stated above.

Table of Contents