Watching Ntsc On A Pal Tv (Mod. Pal); Changing The Frequency Step (Not Applicable To The European Model); Resetting The System; Using And Taking Care Of Discs - Pioneer S-DV313 Operating Instructions Manual

13 Additional information
1 Switch the system into standby.
2 Press SYSTEM SETUP.
3 Use the
buttons to select 'TV System?', then press
ENTER.
4 Use the
buttons to select Auto, PAL or NTSC, then
press ENTER to confirm.
Disc
Type Format NTSC
DVD NTSC
/Super VCD PAL
Video CD NTSC
PAL
CD/no disc —
Watching NTSC on a PAL TV
(MOD. PAL)
Most models of the newly developed count-
down PAL TV system detect 50 Hz (PAL)/60 Hz
(NTSC) and automatically switch vertical
amplitude, resulting in a display without
vertical shrinkage. However, in some cases,
the image may appear without color.
If your PAL TV does not have a V-Hold control,
you may not be able to watch NTSC discs
because of picture roll. If the TV has a V-Hold
control, adjust it until the picture stops
rolling.
On some TVs, the picture may shrink verti-
cally, leaving black bands at the top and
bottom of the screen. This is not a malfunc-
tion; it is caused by the NTSC to PAL conver-
sion.
74
En
(cursor left/right)
(cursor up/down)
Player setting
PAL AUTO
NTSC MOD.PAL NTSC
NTSC PAL PAL
NTSC MOD.PAL NTSC
NTSC PAL PAL
NTSC PAL NTSC or
PAL
Changing the frequency step
Not applicable to the European model
• Default setting: AM 9/FM 50
If you find that you can't tune into stations
successfully, the frequency step may not be
suitable for your country/region.
1 Switch the system into standby.
2 Press SYSTEM SETUP.
3 Use the (cursor left/right)
buttons to select 'FM AM Step?', then
press ENTER.
4 Use the (cursor up/down)
buttons to select 'FM 50 AM 9?' or 'FM100
AM10?' then press ENTER to confirm.

Resetting the system

Use this procedure to reset all system
settings to the factory default.
1 Switch the system into standby.
2 Press and hold the front panel
button for about 8 seconds until the
display shows 'Mem.Clr.?'.
3 Press the front panel
All the system's settings are now reset, and
you should see the 'Let's Get Started' screen.

Using and taking care of discs

Titles, chapters and tracks

DVD discs are generally divided into one or
more titles. Titles may be further subdivided
into chapters.
Title 1
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2
(stop)
button.
Title 2 Title 3