Using The Scart Av Output; (European Model Only); Switching The Tv Audio Input From; Scart To Rca - Pioneer S-DV313 Operating Instructions Manual

Other connections
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT to a set of component inputs
on your TV.
TV
FM
ANTENNA
UNBAL 75Ω
Y P
B
COMPONENT VIDEO OUT
XV–DV313
• The component video ouptut is
switchable between interlaced and
progressive formats. See Component Out
on page 61 for more on this.

Using the SCART AV output

European model only
There are two different kinds of video outputs
you can use to connect this system to your TV.
The SCART output should give you better
picture quality than the standard composite
video output. The SCART AV connector
functions as both a video and audio output.
COMPONENT
INPUT
AM
LOOP ANTENNA
P
R
• Use a commercially available SCART
cable to connect the AV CONNECTOR to
your TV.
TV
IN IN OUT
L
FRONT CENTER SURROUND
6 6 6
L
R
TV AUDIO LINE 1
R
AC IN
6 6 6
SUB
WOOFER
XV-DV313
• SCART cables are available in several
configurations. Make sure that the one
you get will work with this system and
your TV/monitor. You can find the pin
assignments below.

Switching the TV audio input from

SCART to RCA

You can set the TV audio input to RCA or
SCART.
1 Press TV.
2 Press SYSTEM SETUP.
3 Use the (cursor left/right)
buttons to select 'TV Audio?'.
4 Press ENTER.
5 Use the (cursor up/down)
buttons to select SCART or RCA.
6 Press ENTER
OPTICAL IN
AUDIO
ANTENNA FM
LINE 2 AM
AV CONNECTOR UNBAL 75Ω LOOP ANTENNA
VIDEO
OUT
VIDEO
12
71
En