Pioneer SVM-1000 Operating Instructions Manual page 29

USING THE EFFECT FUNCTION
AUDIO Flanger effect is applied. Move
finger on touch panel to right-
left to change effect volume.
VIDEO Outputs an image of a circle with color in motion.
PATTERN1 Outputs an image of a circle
with dot designs.
PATTERN2 Outputs an image of a circle
with border designs.
PATTERN3 Outputs an image of a circle
with vertically stretched image.
PATTERN4 Outputs an image of a circle
with original image.
(*1) When the [HOLD] button is set to ON, you can record the track of your finger touching the touch panel for a maximum of 8 seconds.
(*2) The effect will not become visible unless the video effect performance monitor is touched.
(*3) When effect is set to ON, random effects are applied.
(*4) When effect is set to OFF, effect sounds cannot be heard even on monitor.
Touch more toward right side to
enhance effect. Touch more toward
left side to decrease effect.
The circle moves towards the
touched point.
– – Rotate the dial
clockwise to enhance
the effect. When dial is
rotated fully
counterclockwise, only
original sound is
output.
Sets the size of the 1 to 10 Sets the balance
circle. between the original
video and the effect
video.
29
En