Advertisement
Quick Links
H
OW TO
Regular cleaning will extend the life and performance of your Pioneer plasma display panel. The
recommended way to clean the display screen and vents is described below.
Note: Always unplug the panel before beginning to clean the unit.
Wipe the Display Screen
(never use harsh chemicals)
C
D
LEANING THE
The display screen surface scratches easily. After dusting, gently wipe the screen using the
provided cleaning cloth or a piece of soft flannel or cotton. Do NOT use a tissue, paper towel,
rough-textured cloth, or a wet cloth. Rough textures can scratch the screen and water can seep
under the frame edge. Also avoid rubbing or pushing on the screen.
C
V
LEANING THE
Blocked or clogged panel vents can cause the internal temperature to increase. High
temperatures can damage the plasma's components, resulting in a malfunction or fire. Use a
vacuum cleaner to remove any dust build-up from the vents. The best practice is to clean the
vents once a month or more often, as needed. Set the vacuum cleaner to its weakest setting to
avoid damaging the panel then lightly brush across the vents.
Note: For cleaning the plasma chassis, do not use solvents such as benzene or thinner. Wipe with a
soft cloth.
For additional assistance or cleaning questions, please contact your Pioneer Service
Representative.
C
Y
LEAN
OUR
S
ISPLAY
CREEN
ENTS
P
D
LASMA
ISPLAY
Vacuum the Back Vents
(your vent locations may vary)
P
ANEL
Advertisement
