Operations In The Picture-In-Picture Mode; Selecting The Input Signals To Be Displayed; Zooming Up Pictures; Adjusting The Osd Controls - Pioneer PDP-6100HD Operating Instructions Manual

Plasma display
Hide thumbs Also See for PDP-6100HD:
Table of Contents

Advertisement

Available languages

Available languages

Operations in the Picture-in-picture mode

To move the position of the sub screen, press the cursor
or
button.
button
A
VIDEO1
PC2-BNC
B
button
Top Left
button
button
VIDEO1
PC2-BNC
button
B
A
button
Bottom Left
To change the size of the sub screen, press the
VIDEO1
PC1DSUB
B
A
VIDEO1
PC1DSUB
B
A
button
VIDEO1
A
button
button
To make the desired picture active, press the ACTIVE
SELECT button.
VIDEO1
PC1DSUB
B
ACTIVE
A
SELECT
button
PC2-BNC
A
VIDEO1
B
Top Right
button
button
VIDEO1
PC2-BNC
B
A
Bottom Right
button.
PC1DSUB
B
VIDEO1
PC1DSUB
B
A
button
VIDEO1
PC1DSUB
B
A

Selecting the input signals to be displayed

1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Press the PC1, VIDEO1, 2, 3, COMPONENT1, PC2/
COMPONENT2 or HDMI button to change the
selection of the input signal.
The INPUT/EXIT button on the monitor can also be
used to change the selection.

Zooming up pictures

1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Use the ZOOM (
or
) button to enlage the picture.
For details, see "DIGITAL ZOOM" on page 7.

Adjusting the OSD controls

1. Press the ACTIVE SELECT button to make the desired
picture active.
2. Press the MENU/SET button to display the MAIN MENU.
3. Adjust the setting to your preference.
For details, see "OSD (On Screen Display) Controls"
on page 12.
Note:
During enhanced split screen, some functions of OSD
controls are not available.
11
En

Advertisement

Table of Contents
loading

Table of Contents