Download  Print this page

Loading Envelopes - Canon imagerunner advance 4545 Faq Manual

Hide thumbs

Advertisement

Table of Contents

Loading Envelopes

CAUTION!
• You can load envelopes in the paper drawer 2 or multi-purpose tray.
• Do not use envelopes that have glue attached to their flaps, as the glue may melt due to the heat and pressure of
the fixing unit.
• Do not print on the reverse side of the envelopes (the side with the glued areas).
• For the paper drawer 2, load envelopes the front side face up, and for the multi-purpose tray, load them the front
side face down. For the loading orientation, see the table below.
ISO-C5
Monarch
COM10 No.10
DL
Yougatanaga 3
Nagagata 3
Kakugata 2
Preparation before Loading Envelopes
1
Take five or so pieces of envelopes, fan them well
to eliminate curls, and level the stack flat.
Paper Drawer 2
Paper Drawer 2
Press the stack along
the four side edges.
Multi-Purpose Tray
Multi-Purpose Tray
2
To prevent the sealing edge of the seal flap from
floating from the body of the envelope, press the
envelope in the four corners and expel the air.
11

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: