Mirror Mode - Pioneer PDP-501MX Technical Manual

Plasma display / table-top stand / speaker system
Hide thumbs Also See for PDP-501MX:
Table of Contents

Advertisement

6) Mirror Mode

This mode enables you to reproduce incoming images upside down and the left side of the original appearing on the
right and the right side on the left.
(Activated, this mode is, like the colour mode, effective on whichever input function (INPUTs 1-4) is selected.)
This mode is intended for smart cable arrangement, making it possible to draw bundled cables upwards (towards the
ceiling) when this display is mounted upside down using the ceiling hanging hardware PDK-5002.
MIRROR MODE OFF
NOTES: • This function is not available when standard rate RGB signals (15.6 kHz x 50 Hz, 15.7 kHz x 60 Hz) are
reproducing (no images would show up).
• In using the PDK-5002 mount kit, observe the operating temperature and other limitations specified under
the heading, 4.4. Plasma display ceiling hanging hardware.
1 Enter the Integrator mode (refer to "5.4.1 About the
Integrator Mode").
The ID number of the set of adjustment items will be
indicated in the upper right corner of the screen, where "–
–" is displayed in the illustration.
Select ADDITIONAL SET UP.
2 Move the cursor to MIRROR MODE and set the mode to
XY or OFF with the SET button.
Pressing the SET button toggles Mirror mode between OFF
and XY.
MIRROR MODE applies to each input (INPUTs 1-4) without
exception. All inputs are immediately switched to XY or OFF
set in step 2.
Select EXIT in screen 2 to return to screen 1.
MAKUHARI
MAKUHARI
]
Integrator Mode
MIRROR MODE-XY
Screen 1
MENU
PICTURE
WHITE BALANCE
SCREEN
3ADDITIONAL SET UP
TOTAL INITIALIZE
Screen 2
ADDITIONAL SET UP
COLOUR MODE : 1
BAUD RATE
:
]
HOUR METER : 00123
3MIRROR MODE : OFF
STD-RGB
: OFF
SIDE MASK ADJ.
EXIT
– –
– –
4800BPS
93

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pdp-v501xPdk-5001Pdp-s02-lr

Table of Contents