JVC HR-XVC22UC Service Manual page 12

Dvd player & video cassette recorder
Hide thumbs Also See for HR-XVC22UC:
Table of Contents

Advertisement

3.2
Loading mechanism assembly
3.2.1 Removing the tray (See Figure 3-2a, Figure 3-2b, Figure 3-2c, Figure 3-2d, Figure 3-2e, Figure 3-2f)
(1) Push a of the slide cam on the hole in the right side of the
loading base by using a driver until it stops. (See Figure 3-
2a.)
(2) The tray comes out. Pull the tray in a front direction until it
stops.
(3) Remove the two screws A attaching the slide bracket. (See
Figure 3-2b.)
(4) Tilt the tray in a direction of the arrow around the point in
the left rear part of the tray. (See Figure 3-2c.)
(5) The rail of the tray is removed from b of the loading base.
Then, remove the tray upward. (See Figure 3-2d.)
Attaching the tray:
Engage c of the loading base to the projection of the tray while
tilting the tray to the left. Turn the tray in a direction of the ar-
row, and attach the slide bracket. (See Figure 3-2e.)
Note:
Prior to the procedure above, move the slide cam in a direction
of the arrow so that d of the slide cam can be inserted in e of
the tray. (See Figure 3-2f.)
Tray
Push
Slide cam part a
Fig.3-2a
Slide bracket
A
Fig.3-2b
1-12 (No.YD008)
Loading base
A
Tray
The point in the left rear part
Fig.3-2c
Loading base part b
Rail of the tray
Fig.3-2d
Projection of the tray
Projection of the tray
Loading base part c
Fig.3-2e
Fig.3-2f
Tray
Part e
Part d
Slide cam

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr-xvc23ucHr-xvc26usHr-xvc27usHr-xvc27uc

Table of Contents