Download  Print this page

Editing (dvd Deck); Digital Audio Dubbing - JVC HR-XVC22UC Service Manual

Dvd player & video cassette recorder.
Hide thumbs

Advertisement

EDITING (DVD DECK)

Digital Audio
Dubbing
● Turn on the TV and select the VCR channel (or AV
mode).
● Slide the TV/VCR/DVD switch to the right.
Coaxial cable
(not supplied)
Rear of unit
DIGITAL AUDIO OUT
Recorder
Digital audio device
(MD deck etc.)
Player
You can dub selected audio from the DVD or Audio CD disc to a
MD etc.
However, it is not possible to dub the copy-protected disc.
Example: Dubbing to a MD
A
Make connections.
Connect the coaxial cable between the unit and the
digital audio device.
B
Place a disc and load a MD.
For the DVD deck
A Press OPEN/CLOSE (x) on the DVD deck to open the
disc tray.
B Place the disc in the disc tray.
C Press OPEN/CLOSE (x) on the DVD deck to close the
disc tray.
For the digital audio device
Insert a MD.
C
Prepare the DVD deck for dubbing.
A Press DVD and select the audio to be dubbed.
B Search for the point where you want to start dubbing
by pressing PLAY (4), FF (5) or REW (3) then
press STOP (8).
C Press REW (3) a little, then press PLAY (4) to start
playback.
D Press PAUSE (9) to pause playback a little before the
start point.
D
Prepare the audio device for dubbing.
Select the input mode.
E
Start dubbing.
A Press PLAY (4) to start playback on the DVD deck.
B Start recording on the audio device.
F
End dubbing.
Stop recording on the audio device. Then press STOP (8)
to stop playback on the DVD deck.
NOTES:
● There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
● You can also dub a Video CD or SVCD. Set "DIGITAL AUDIO
OUTPUT" to "PCM ONLY". (
71
EN
pg. 78)

Advertisement

Table of Contents

   Related Manuals for JVC HR-XVC22UC

This manual is also suitable for:

Hr-xvc23ucHr-xvc26usHr-xvc27usHr-xvc27uc

Comments to this Manuals

Symbols: 0
Latest comments: