Select And Start A Washing Programme - Zanussi ZDS 201 User Manual

1

Select and start a washing programme

Starting the washing programme without delay start
1. Close the appliance door.
2. Set the washing programme. Refer to 'Washing pro-
grammes'. The on/off indicator comes on.
3. Press the start/cancel button, the washing programme
starts automatically. The start/cancel indicator comes
on.
Starting the washing programme with delay start
1. Close the appliance door.
2. Set the washing programme. Refer to 'Washing pro-
grammes'. The on/off indicator comes on.
3. Press the delay start button. The delay start indicator
comes on.
4. Press the start/cancel button, the countdown starts
automatically.
• When the countdown is completed, the washing
programme starts automatically. The delay start in-
dicator goes off.
The opening of the appliance door interrupts the
countdown. When you close the door, the count-
down continues from the point of interruption.
Cancelling the delay start
If the delay start has not started, you can change the se-
lection.
To change the selection while the delay start operates, it is
necessary to cancel the delay start.
1. Press and hold the start/cancel button until the start/
cancel indicator and the delay start indicator go off.
2. Press the start/cancel button to start the washing pro-
gramme.
10
2
Do these steps to move the upper basket to the higher po-
sition:
1. Move the front runner stops (A) out.
2. Pull the basket out.
3. Put the basket in the higher or lower position.
4. Put back the front runner stops (A) in their initial po-
sition.
Caution! If the basket is in the higher position, do
not put cups on the cup racks.
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues from the point
of interruption.
Cancelling the washing programme
If the washing programme has not started, you can change
the selection.
To change the selection while the washing programme
operates, it is necessary to cancel the programme.
• Press and hold the start/cancel button until the start/
cancel indicator goes off.
Make sure that there is detergent in the detergent
dispenser before you start a new washing pro-
gramme.
End of the washing programme
When the washing programme is completed, the end indi-
cator comes on.
Deactivate the appliance and open the appliance door.
For better drying results, keep the appliance door
ajar for some minutes.
Remove the items from the baskets
• Let the dishes become cold before you remove them
from the appliance. Hot dishes can be easily damaged.
• First remove the items from the lower basket, then from
the upper basket.
• There can be water on the sides and on the door of the
appliance. Stainless steel becomes cool more quickly
than the dishes.