Three sockets are available on the main unit :
Socket 1 : Antenna cable for RF information.
Socket 2 : Headset socket.
Socket 3 : AC/DC, CLA and accessories socket.
IMEI label stands for International Mobile Equipment Identity. The IMEI label is stuck on the rear case
of the terminal. It is held in the logic circuitry of the main board itself. If the main board is changed then
IMEI will change.
Date Code is made of 3 digits and indicates the date of shipment from factory. For example, in H09, H
stands for 1998 and 09 for September (I stands for 1999).
Mitsubishi Electric Telecom Europe SA
ZA le Piquet, 35370 Etrelles
Phone: +33 2 99 75 71 00
Fax: +33 2 99 75 71 47
Cap belt clip
Red stripe becomes Pink
Level 2 Service Manual
GALAXY ASTRAL GEO-GEO WAP