Software Version; Software And Perso Version; Operator Debugging - Mitsubishi Electric GALAXY Service Manual

7 Software version

To display the software version, connect a charged battery, press the power key. Wait a few seconds,
then hold the * key and press 5806.
Then on the mobile, the following message is displayed ,
for example :

8 Software and Perso version

To display the software and the perso (personalisation), connect a charged battery, press the power
key. Wait a few seconds, then hold the * key and press 5807.
Then on the mobile, the following message is displayed ,
for example :

9 Operator Debugging

To display the RX level (in dBm), insert the SIM card (from service provider or test SIM card using
CMD in manual test) , connect a charged battery and press the power key. When the mobile displays
the network (real network or test network 001-01), hold the * key and press 4329
Then on the mobile, the following message is displayed ,
for example :
B099 07 -085
MCC001 MNC01
1.a.1.1.1.1.1.1
To exit from the Operator debugging mode, use the same command : hold the * key and press 4329
Mitsubishi Electric Telecom Europe SA
ZA le Piquet, 35370 Etrelles
Phone: +33 2 99 75 71 00
Fax: +33 2 99 75 71 47
- - VERSION - - -
21157001
- - -NAME- - - -
14/06/1999
- - VERSION - - -
21157001
- - - PERSO - - - -
21433S00
RX Level (dBm)
And
other
datas
...
Level 2 Service Manual
GALAXY ASTRAL GEO-GEO WAP
Date: 04/00
27/29
Version G