D How To Print Labels Using Ms Tools; Equipment, Software And Drivers Required - Mitsubishi Electric GALAXY Service Manual

6.d How to print labels using MS Tools
6.d.1 Equipment, Software and drivers required
Equipment description:
COM1
COM2
MS Tools software version 4.01 (or higher) is required to print labels.
This software is provided by MITSUBISHI ELECTRIC FRANCE under floppy format (2 floppies)
MS Tools is available on Windows 95, 98, NT4 OS and to install it you need theses 3 files:
Setup procedure :
1. Launch Setup.exe
2. Click on Finish
3. Click on OK
MS Tools is now installed on your computer and available in your START menu
MS tools program does not send information directly to ZEBRA 90Xi II printer, it sends information to
NI VISA driver and NI VISA driver sends information to ZEBRA 90Xi II printer.
Driver required: NI VISA
NI VISA driver is required and can be provided by MITSUBISHI ELECTRIC FRANCE.
The NI VISA driver is located on NATIONAL INSTRUMENTS NI 488.2 CD-ROM
To install this driver on your PC, launch the setup.EXE which is located in the NI-VISA folder on the
CD-ROM.
Mitsubishi Electric Telecom Europe SA
ZA le Piquet, 35370 Etrelles
Phone: +33 2 99 75 71 00
Fax: +33 2 99 75 71 47
ZEBRA
90XiII
Printer
Level 2 Service Manual
GALAXY ASTRAL GEO-GEO WAP
Mobile with full battery
Date: 04/00
25/29
Version G