Audio Settings - Pioneer PDV-20 Operating Instructions Manual

Audio settings

Dolby Digital Out
• Set in Setup Navigator (Default: Dolby
Digital)
Audio1 2 Video Language General Other
Dolby Digital Out Dolby Digital
Dolby Digital 3 PCM
DTS Out –
96kHz 3 48kHz
96kHz PCM Out –
MPEG 3 PCM
MPEG Out –
i Change Dolby Digital output mode
Move Exit
SETUP
You only need to make this setting if you
connected this system to another
component (AV amplifier, etc.) using the
optical digital out.
If your AV amplifier (or other connected
component) is Dolby Digital compatible,
set to Dolby Digital, otherwise set to
Dolby Digital 3 PCM.
DTS Out
• Set in Setup Navigator (Default: Off)
Audio1 2 Video Language General Other
Dolby Digital Out – Dolby Digital
Off
DTS Out
96kHz PCM Out –
DTS
MPEG 3 PCM
MPEG Out –
i Changes DTS output mode
Move SETUP Exit
You only need to make this setting if you
connected this system to another
component (AV amplifier, etc.) using the
digital out.
If your AV amplifier (or other connected
component) is DTS compatible, set to
DTS, otherwise set to Off.
04 The Setup Menu
96kHz PCM Out
• Set in Setup Navigator (Default:
96kHz)
Audio1 2 Video Language General Other
Dolby Digital Out – Dolby Digital
DTS Out – Off
96kHz 3 48kHz
96kHz PCM Out
MPEG Out –
96kHz
i Changes 96kHz output mode
Move Exit
SETUP
You only need to make this setting if you
connected this system to another
component (MD recorder, etc.) using the
digital out.
If your AV amplifier (or other connected
component) is 96kHz audio compatible, set
to 96kHz, otherwise set to 96kHz 3
48kHz.
43
En