Speaker Distance - Pioneer Elite DV-48AV Operating Instructions Manual

Initial Settings menu

Speaker Distance

• Default settings: all speakers
You only need to make this setting if you
connected this player to your amplifier using the
5.1 channel analog outputs.
These settings do not affect any digital audio
output.
To get the best surround sound from your
system, you should set up the speaker
distances from your listening position.
Initial Settings
Digital Audio Out Audio Output Mode
Video Output Speaker Distance
Language Speaker Installation
Display
Options
Speakers
Use the / (cursor up/down) to select
1
a speaker.
• The L and R speakers are paired; you can't
set them differently.
Initial Settings
Digital Audio Out
Video Output
L 10.0ft
Language
C 10.0ft
Display
R 10.0ft
Options
SR 10.0ft
Speakers
SL 10.0ft
Press  (cursor right) to change the
2
speaker distance for the highlighted
speaker.
Use the / (cursor up/down) to
3
change the distance.
• When you change the distance settings of
the front left ( L ) or front right (
all the other speaker distances change
relative to it.
• Front left/right ( /
L R
be set from 1.0 ft to 30.0 ft in 1.0 ft
increments.
• The center speaker (
–7.0 ft to 0.0 ft relative to the front left/right
speakers.
10.0ft

5.1 Channel
R ) speakers,
) speaker distances can
C ) can be set from
• Surround left/right (
be set from –20.0 ft to 0.0 ft relative to the
front left/right speakers.
• You can't set the subwoofer (
Press  (cursor left) to go back to the
4
speaker list if you want to modify another
speaker, or press ENTER to exit the Speaker
Distance screen.
Note
During playback of SACD and MPEG-audio
DVD-Video discs, the effective
speaker distance settings are –3.0 ft to 0.0 ft
relative to the front left/right speakers.
SL / SR ) speakers can
) distance.
SW
, and
C SL SR
08
49
En