S S etting up the keyboard
The keyboard uses Bluetooth
To establish a Bluetooth
automatic NFC-assisted pairing or you can pair the devices manually.
Make sure that the NFC function is turned on and that the
screen is active and unlocked.
Turn on your keyboard.
Place the Android™ device over the NFC detection area of your keyboard so
that the NFC detection area of each device touches the other. The devices
should now connect to each other automatically.
The NFC function is unavailable when the keyboard is supplied power via a USB cable.
Make sure the charger is disconnected from the keyboard.
Turn on the keyboard. The keyboard enters pairing mode
automatically and the Bluetooth
Turn on the Bluetooth
connect to the keyboard.
If the Bluetooth
notification light stops flashing before you get time to pair your mobile device
with the keyboard, hold down the Pair key until the Bluetooth
then try again.
This is an Internet version of this publication. © Print only for private use.
technology to communicate with your Android device.
connection between the two devices, you can either use
notification light flashes rapidly.
function, then search for and
notification light flashes and