Introduction; Equipment; Technical Characteristics Ki 208, Ki - Honeywell KI 209 Installation Manual

RELEASED FOR THE EXCLUSIVE USE BY: AIRCRAFT ELECTRONICS ASSOCIATION
BENDIX/KING
1.1

INTRODUCTION

This manual contains information relative to the physical, mechanical and electrical
characteristics of the Bendix/King Silver Crown KI 208 and KI 209.
1.2 EQUIPMENT DESCRIPTION
The Bendix/King KI 208 VOR Indicator is designed to operate with VHF navigational
equipment (such as the KX 155, KX 155A, KX 165A) to provide OMNI (VOR) or LO-
CALIZER (LOC) information. The VHF navigational receiver receives and detects the
omni or localizer information. The KI 208 converts this information to DC signals which
drive the LEFT-RIGHT needle and the TO-OFF-FROM flag of the visual indicator.
The KI 209 ILS Indicator performs the same functions as the KI 208. In addition, it
contains an UP-DOWN glideslope needle with an OFF warning flag.
An anti reflective lens coating is also available on some models of the KI 208 and
KI 209.
1.3 TECHNICAL CHARACTERISTICS
TABLE 1-1 Technical Characteristics KI 208, KI 209
SPECIFICATION
KI208, KI209 TSO COMPLIANCE:
ADDITIONAL TSO COMPLIANCE
FOR KI 209 ONLY:
SIZE:
WEIGHT:
POWER REQUIREMENTS:
KI 208, KI 209 Indicator
KI 208 Lighting
KI 209 Lighting
KI 208, KI 209 Lighting
Rev 4, Aug 2002
SECTION I
GENERAL INFORMATION
C40a, C36c Class C Cat 2.
DO-138 Environmental Cat. DAPAAAXXXXXX.
C34c Class D Cat 2.
See Figure 2-5
See Figure 2-5
14 Vdc at 50 mA, 28 Vdc at 50 mA.
14 Vdc at 80 ±20 mA.
14 Vdc at 160 ±45 mA.
28 Vdc at 80 ±20 mA.
IM 006-00140-0004
CHARACTERISTIC
(P/N 155-05235-0000).
(P/N 155-05235-0000).
KI 208, KI 209
Page 1-1