Video Output Settings - Pioneer DV-490V-S Operating Instructions Manual

Pioneer dvd player operating instructions
Hide thumbs Also See for DV-490V-S:
Table of Contents

Advertisement

Initial Settings menu
Setting
DTS Out
96 kHz PCM Out
MPEG Out
HDMI Out*
* DV-490V only.

Video Output settings

Setting
TV Screen
(This setting effective for
analog and HDMI video
output. See also Screen
sizes and disc formats
on page 45.)
Component Out
Option
DTS
Off
96kHz > 48kHz
96kHz
MPEG > PCM
MPEG
LPCM (2CH)
Auto
Off
Option
4:3 (Letter Box)
4:3 (Pan & Scan)
16:9 (Wide)
Interlace
Progressive
What it means
DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not compatible
with DTS audio.)
No digital audio is output when playing a DTS disc.
96 kHz digital audio is converted to 48 kHz for digital output.
96 kHz digital audio is output as is at 96 kHz.
MPEG encoded digital audio is converted to PCM audio for
digital output.
MPEG encoded digital audio is output as is.
Set if your monitor or device only accepts stereo input. On this
setting multichannel audio is downmixed to 2 channels for
stereo linear PCM output. (In case of DTS source, the HDMI
audio output is turned off.)
Dolby Digital, DTS and MPEG sources are processed
according to how they were encoded, but if your amplifire/
monitor is not compatible with DTS audio, DTS audio output
from HDMI is turned off. Linear PCM sources are heard as is.
No digital audio output.
What it means
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with black bars top and bottom.
Set if you have a conventional 4:3 TV. Widescreen movies are
shown with the sides cropped so that the image fills the screen.
Set if you have a widescreen TV.
Set if your TV is not compatible with progressive scan video.
Set if your TV is compatible with progressive scan video (see
your TV's instruction manual for details). See also Switching
the video output to interlace using the front panel controls on
page 12.
Note that progressive scan video is only output from the
component video jacks and that there is no output from the
composite and S-video jacks when this setting is selected.
07
39
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-595k-sDv-490v-kDv-393-sDv-490v

Table of Contents